|
|
10 Foot. Aluminum Windmills - American Made
Made from 100% aluminum, this aluminum windmill will never rust! Ball bearings allow easy windmill motion. Stainless steel hardware for a windmill that will never rust. Greeze zerts for easy lubrication. Aluminum windmill assembly requires a phillips screwdriver and 3/8inch wrench. Tower legs are 3/4 square tubular aluminum with a .090 wall thickness. Assembly required. Comes with ground anchors that do not require cementing.
From: Krupps
More Info.
|
12 Foot Aluminum Windmills - American Made
Made from 100% aluminum, this windmill will never rust! Stainless steel hardware. Ball bearings allow easy windmill motion. Assembly requires a phillips screwdriver, 3/8inch wrench. Ships UPS. (12' tall;41inch Square base, 30inch fan) Tower legs are 3/4 square tubular aluminum with a .090 wall thickness. Assembly required. Comes with ground anchors that do not require cementing.
From: Krupps
More Info.
|
18 Foot Aluminum Windmills American Made
18ft Aluminum Windmill with 48 inch fan blade. American Made, from 100% aluminum, this windmill will never rust! Stainless steel hardware. Ball bearings allow easy windmill motion. Grease zert for easy lubrication. Assembly required. Requires a phillips screwdriver, 3/8inch wrench. Tower legs are 1inch square tubular aluminum with a .090 wall thickness. Base is 54inch Square on the outside. Stainless steel shaft. Includes ground anchors that do not require cementing.
From: Krupps
More Info.
|
22 Foot Aluminum Windmills - American Made
Made from 100% aluminum, this windmill will never rust! Stainless steel hardware. Ball bearings allow easy windmill motion. Assembly required. Assembly requires a phillips screwdriver, 3/8inch wrench. Tower legs are 1inch square tubular aluminum with a .090 wall thickness.
From: Krupps
More Info.
|
24in. Windmill Fan Blade Assembly
This blade assembly is made from aluminum and galvanized steel for strength. Ball bearings allow easy windmill motion. (24inch fan diameter, recommended for 6-8ft. windmills) Includes fan blade, tail assembly, shaft, square tube w/pin (swivel to wind direction), and cap.
From: Krupps
More Info.
|
30 Foot Aluminum Windmills - American Made
30 ft windmill with a 72 inch fan blade. Made in America from 100% aluminum with stainless steel hardware, this windmill will never rust! Ball bearings with greaze zerts for easy lubrication and windmill motion. Assembly required. Assembly requires a 7/16inch wrench. Tower legs are 1inch square tubular aluminum with a .090 wall thickness. Ground anchors included that do not require cementing.
From: Krupps
More Info.
|
6 Foot Aluminum Windmills
Made from 100% aluminum, this windmill will never rust! Stainless steel hardware. Ball bearings allow easy windmill motion. Has grease zert for easy lubrication. Assembly required. Assembly requires a phillips screwdriver, 3/8inch wrench. (6' tall; 22inch Square base, 22inch fan) Tower legs are 3/4 square tubular aluminum with a .090 wall thickness. Comes with ground anchors.
From: Krupps
More Info.
|
8 Foot Aluminum Windmills
Made from 100% aluminum, this windmill will never rust! Stainless steel hardware. Ball bearings allow easy windmill motion. Fan blade has grease zerts for easy lubrication. Assembly required. Assembly requires a screwdriver and small wrench. (8' tall' 31inch Square base, 24inch fan) Comes with ground anchors.
From: Krupps
More Info.
|
18 Foot Aluminum Windmill Tower Only
Amish Made from 100% aluminum, this windmill tower will never rust! Stainless steel hardware. Assembly requires a phillips screwdriver, 3/8inch wrench. Ships UPS. Tower legs are 1inch square tubular aluminum with a .090 wall thickness.
From: Krupps
More Info.
|
Blade for 8 Foot Steel Windmills - 22 Inch
Blade only for 8' steel windmill. This 22inch blade assembly has quality ball bearings which include grease fittings. This blade is made for our 8' AE1 windmill and may not fit other windmills. Blades are not returnable. Fin and Tail assembly not included. The shaft on this is 1/2inch .
From: Krupps
More Info.
|
Little Red Outdoor Garden Windmill Pump
Miniature replica of the old time windmill pump. Built to scale to fit our 8ft. ornamental windmill. Does not pump water, but water can be circulated through hollow base and spout. 24in. tall. Made of heavy cast aluminum.
From: Krupps
More Info.
|
8 Foot Steel Windmills - American Made
Don't be fooled by cheap imitations, ours weighs 32 lbs., theirs only 22 lbs. This official Air Electric Machine windmill is the highest quality on the market, MADE IN THE USA. Made of galvanized steel, it's top rotates to indicate wind direction. The blade assembly 22inch revolves on quality ball bearings. Assembly required. Includes grease fittings and stakes for mounting the windmill. Base of windmill is 26inch x26inch .
From: Krupps
More Info.
|
2 Foot Extension for M1 Windmills
This 2 ft. extension will fit in the middle of the 8ft. steel windmill (AEM1) to make the windmill an additional 2ft. tall. The total height of the mill will then be 10ft.
From: Krupps
More Info.
|
American Made 4-1/2 ft. Steel Windmills
Add the rural charm of an old-fashioned windmill to your yard or garden decor with this American- Made steel windmill. The top rotates to indicate wind direction and the blade assembly revolves on quality ball bearings. Don't be fooled by cheap imitations, our mill has a balanced blade and is made of galvanized steel. 12 inch diameter wheel.
From: Krupps
More Info.
|
8 Foot John Deere Windmill Fan Blade Assembly
Fan with bearings for the 8ft John Deere Windmill.
From: Krupps
More Info.
|
8 Foot John Deere Windmills
Currently on back order until May 2007. This John Deere Windmill is authorized and licensed. All metal John Deere Windmill stands 8ft. tall with a 22in. blade. Assembly required. It has precision brass bushings for the propeller and the axis, easily spinning with the lightest breeze. Material is powder coated steel.
From: Krupps
More Info.
|
4.5 Foot John Deere Windmills
Currently on back order until May 2007. This John Deere Windmill is authorized and licensed. All metal John Deere Windmill stands 4.5 ft tall with a 12in. blade. Assembly required. It has precision brass bushings for the propeller and the axis, easily spinning with the lightest breeze.
From: Krupps
More Info.
|
30 Inch Windmill Fan Blade Assembly
This blade assembly is made from aluminum and galvanized steel for strength. Ball bearings allow easy windmill motion. (30inch fan diameter). Includes fan blade, tail assembly, shaft, square tube w/pin (swivel to wind direction), and cap. For use with a 10 to 12 foot windmill.
From: Krupps
More Info.
|
Tail Assembly for 8 Foot Steel Windmill
This tail assembly is made for our 8' AE1 windmill and may not fit other windmills.
From: Krupps
More Info.
|
Aerator Windmill
This Aluminum Windmill Aerator is a must for your pond properly maintained in most cases that have poor quality water. Comes in two sizes 20 foot and 30 foot. Made in USA. Both sizes come with the 72 inch blade.
From: Krupps
More Info.
|
Grab
